Altera JESD204B IP Uživatelský manuál Strana 69

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 158
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 68
Signal Width Direction Description
jesd204_tx_avs_
chipselect
1 Input When this signal is present, the slave port
ignores all Avalon-MM signals unless this
signal is asserted. This signal must be used in
combination with read or write. If the Avalon-
MM bus does not support chip select, you are
recommended to tie this port to 1.
jesd204_tx_avs_
address[]
8 Input For Avalon-MM slave, the interconnect
translates the byte address into a word address
in the address space so that each slave access is
for a word of data. For example, address = 0
selects the first word of the slave and address =
1 selects the second word of the slave.
jesd204_tx_avs_
writedata[]
32 Input 32-bit data for write transfers. The width of
this signal and the jesd204_tx_avs_
readdata[31:0] signal must be the same if
both signals are present
jesd204_tx_avs_read
1 Input This signal is asserted to indicate a read
transfer. This is an active high signal and
requires the jesd204_tx_avs_
readdata[31:0] signal to be in use.
jesd204_tx_avs_write
1 Input This signal is asserted to indicate a write
transfer. This is an active high signal and
requires the jesd204_tx_avs_
writedata[31:0] signal to be in use.
jesd204_tx_avs_
readdata[]
32 Output 32-bit data driven from the Avalon-MM slave
to master in response to a read transfer.
jesd204_tx_avs_
waitrequest
1 Output This signal is asserted by the Avalon-MM slave
to indicate that it is unable to respond to a
read or write request. The JESD204B IP core
ties this signal to 0 to return the data in the
access cycle.
Signal Width Direction Description
JESD204 Interface
sysref
1 Input
SYSREF signal for JESD204B Subclass 1
implementation.
For Subclass 0 and Subclass 2 mode, tie-off
this signal to 0.
4-32
Transmitter
UG-01142
2015.05.04
Altera Corporation
JESD204B IP Core Functional Description
Send Feedback
Zobrazit stránku 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 157 158

Komentáře k této Příručce

Žádné komentáře