
Port Name Type Condition Description
extswitch Input Required Assert this input signal high (1’b1) to manually
switch the clock for at least 3 cycles.
activeclk Output Optional Output signal to determine which input clock is
in use by the PLL.
clkbad Output Optional Output signal to determine which input clock is
working.
cclk
(8)
Input Optional C-Counter clock source from the fracturable
fractional PLL output counter 4 or 13.
adjpllin Input Optional Adjacent fractional PLL clock source.
cascade_out Output Optional Output signal to feed into other fractional PLLs.
This port acts as a bus port when the upstream
PLL has two or more output clocks.
Document Revision History
Date Version Changes
May 2015 2015.05.04
• Added Arria V and Cyclone V devices in adjpllin Cascading for
Supported Devices table.
• cclk input clock source is not supported in Cyclone V devices.
Updated the information and notes in the following locations:
• Altera PLL IP Core Parameters - Cascading Tab table
• PLL-to-PLL Cascading section
• Reference Clock Inputs for Fractional PLL table
• Altera PLL Ports table
August 2014 2014.08.01
• Grouped parameters in separate tables according to parameter editor
tabs.
• Added parameters for the General tab and Cascading tab.
• Updated parameters for the Clock Switchover tab.
• Updated information on PLL-to-PLL Cascading.
• Added information on PLL output counter cascading.
December
2013
1.3 Updated Table 3 on page 10 to update reset port information.
(8)
Not supported in Cyclone V devices.
UG-01087
2015.05.04
Document Revision History
17
Altera Phase-Locked Loop (Altera PLL) IP Core User Guide
Altera Corporation
Send Feedback
Komentáře k této Příručce