
Signal Direction Description
alpha_out_N_ready Input alpha_out port Avalon-ST ready signal. The downstream
device asserts this signal when it is able to receive data.
alpha_out_N_startofpacket Output alpha_out port Avalon-ST startofpacket signal. This
signal marks the start of an Avalon-ST packet.
alpha_out_N_valid Output alpha_out port Avalon-ST valid signal. The IP core
asserts this signal when it produces data.
Video Switching Control Registers
Table 18-5: Switch Control Register Map
The table below describes the control register map for Switch IP core.
Address Register Description
0 Control Bit 0 of this register is the Go bit, all other bits are unused.
• Writing a 1 to bit 0 starts the IP core.
• Writing a 0 to bit 0 stops the IP core.
1 Status Bit 0 of this register is the Status bit, all other bits are unused.
• Reading a 1 from bit 0 indicates the IP core is running—
video is flowing through it.
• Reading a 0 from bit 0 indicates that the IP has stopped
running.
2 Output Switch Writing a 1 to bit 0 indicates that the video output streams
must be synchronized; and the new values in the output
control registers must be loaded.
3 Dout0 Output Control A one-hot value that selects which video input stream must
propagate to this output. For example, for a 3-input switch:
• 3'b000 = no output
• 3'b001 = din_0
• 3'b010 = din_1
• 3'b100 = din_2
4 Dout1 Output Control As Dout0 Output Control but for output dout1.
... ... ...
15 Dout12 Output
Control
As Dout0 Output Control but for output dout12.
UG-VIPSUITE
2015.05.04
Video Switching Control Registers
18-5
Video Switching IP Cores
Altera Corporation
Send Feedback
Komentáře k této Příručce