Altera PCI Development Kit, Cyclone II Edition Getting St Uživatelský manuál Strana 36

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 40
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 35
2–26 Core Version a.b.c variable Altera Corporation
PCI Development Kit, Cyclone II Edition Getting Started User Guide May 2005
Using the Board as a Prototyping Platform
Figure 2–11. ModelSim Waveform Window
f For more information on the reference design, refer to AN 390:
PCI-to-DDR2 Reference Design.
Compile Your Design in the Quartus II Software
To generate programming files by synthesizing and compiling your
design in the Quartus II software, perform the following steps:
1. Run the Quartus II software.
2. Choose Open Project (File menu).
3. Browse to the c:\pci_prototype_example\QuartusII directory.
4. Select cpd_top.qpf.
5. Click Open to select the project file.
6. If you did not install the DDR2 SDRAM Controller Compiler in the
default directory c:\MegaCore\ddr_ddr2_sdram-v3.2.0, you must
modify the library directory in the Quartus II project.
Zobrazit stránku 35
1 2 ... 31 32 33 34 35 36 37 38 39 40

Komentáře k této Příručce

Žádné komentáře