Altera Embedded Systems Development Kit, Cyclone III Edit Uživatelský manuál Strana 27

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 82
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 26
3–5 Development Board Version 1.0. Altera Corporation
Altera Embedded Systems Development Kit, Cyclone III Edition July 2010
Restoring the Factory Design to the Flash device
9. Click Start to download the selected configuration file to FPGA.
When the progress bar reaches 100% the FPGA is ready to access
and program the Flash device
You have now successfully programmed the flash device with a
configuration for your board. To configure the board form the flash
device, power cycle the board. Powering on the board causes the flash
device to load a new configuration into the FPGA. The CONF DONE LED
lights up and the hardware functions associated with the design take
effect.
Restoring the
Factory Design
to the Flash
device
To restore the development board to factory conditions, refer to
instructions as described in Chapter 11, Restoring the Factory Design to
the Flash Device.
Zobrazit stránku 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 81 82

Komentáře k této Příručce

Žádné komentáře