Altera High-Speed Development Kit, Stratix GX Edition Uživatelský manuál Strana 36

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 140
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 35
4–8 Quartus II Version 3.0 Altera Corporation
Stratix GX HM-Zd SPI-4.2 Loopback High-Speed Development Kit, Stratix GX Edition User Guide
8. The test continues until you press the Ctrl + C keys. Press these keys
to stop the status display in the SOPC Builder SDK Shell.
9. Press S2 to stop the test.
Stratix GX HM-
Zd SPI-4.2
Loopback
The Stratix GX HM-Zd SPI-4.2 loopback test design tests the SPI-4.2
source synchronous signals at up to 1 Gbps using the provided HM-ZD
SPI-4.2 loopback cards.
Required Hardware
This test requires the following hardware:
HM-Zd SPI-4.2 loopback cards (labeled J108 and J109)
ATX power supply
Test Setup
Perform the following steps to set up the test.
1. Remove power from the board.
2. Install the HM-Zd SPI-4.2 loopback cards as shown in Figure 4–5.
3. Set the board’s switches as shown in Table 4–1 for this test.
Zobrazit stránku 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 139 140

Komentáře k této Příručce

Žádné komentáře